<!– @page { margin: 2cm } P { margin-bottom: 0.21cm } A:link { so-language: zxx } –>

Kitchen sink is one of the most important things in your kitchen. You need it to prepare and dispose food, wash dishes etc. Installing a kitchen sink may seem tough and complicated and many of you may want to hire professionals to do it, but in fact, you can actually do it by yourself and save a lot of money. All you need is some simple instructions.

1. Properly locate the opening

Most sinks come with a template provided by the sink manufacturer to help you accurately mark the outline of the hole and ensure right placement. Place the template on the countertop. Make sure it is exactly where you want it and it must be placed so that it is at least 1.5 to 2 inches away from the countertop’s edge. Stick the template with tape and draw a line around the edge with a marker directly onto the counter. Remove the template after you are done with this step.

2. Cut the opening

Drill 3/8-inch diameter holes at each corner of the marked opening. Use either jigsaw or saber-saw blade to cut out the piece following the marked lines. Remove the cut-out after you are done with the cutting procedure.

3. Install kitchen faucet and sink strainers

Before installing the kitchen sink, install the kitchen faucet or faucet sprayer first. After that, install the sink strainer.

4. Installing the kitchen sink

Flip the sink upside down. You can put some scrap sticks at the edges of the opening if you don’t want the countertop to be scratched. It can also protect your fingers. The sink is normally fixed with special mounting clips that are tightened with screwdriver. The spacing of the clips may vary. Refer to the manufacturer’s manual.

5. Finishing up

The final step is to connect the sink the the parts underneath the sink. First connect the P-Trap. Then, connect the faucet lines to the hot and cold supply lines using flexible supply tubes. Connect the strainer to the drain pipe. After making sure everything is connected safely, turn on the water to flush the system. Let it run for a few minutes and then reinstall the aerator. Your new sink is good to go!

Article Source: http://www.articlesbase.com/customer-service-articles/how-to-install-a-kitchen-sink-3898404.html

When it comes to sink and shower faucets these days, homeowners have more options to choose from than ever before. A stylish designer sink faucet can turn an otherwise ordinary bathroom into a unique and classy one, while an upgraded shower faucet can make the act of cleansing oneself a lot more comfortable.

If you’re looking to replace your bathroom faucets with newer, more updated models, you can either make the switch on your own, or hire a plumbing professional for the job. Of course, when it comes to the latter, the only real downside involved is the notion of having to pay for labor. And since faucet installation can be relatively easy, anyone who’s reasonably handy might be tempted to just do it himself.

There are plenty of good reasons to pay for professional faucet installation, but before you call a professional, take a step back and try to assess the situation at hand. Blair Harris is the director of Sales and Marketing at A&R Mechanical Services, a locally owned, full service Plumbing, Heating and Air Conditioning company that has been serving Amarillo, Texas and the surrounding area since 1992. According to her, it is common for a homeowner to feel uneasy about the idea of putting in his own bathrooms faucets. In addition, there are certain circumstances under which even the handiest of homeowners may want to consider paying for professional faucet installation.

When Dealing With Deeper Countertops

If you’re looking to replace a faucet on a granite or marble bathroom countertop, you may want to call in a professional to do the job. Since granite, marble, and other such stone surfaces tend to be very thick, it can sometimes be challenging to get a new faucet to fit. In some cases, the use of an adapter kit might be necessary; and in other situations, a plumber might have to fashion an on-the-spot fix in order to enable a faucet to work with its surroundings. Therefore, if you’re dealing with deeper countertops, you should rely on a professional for faucet installation. Additionally, some circumstances might require the running of additional piping or the drilling of additional holes in order to accommodate a new faucet; so unless you’re really handy, you might get in way over you head if your situation comes to require a lot of extra work that you’re not equipped to handle yourself.

When Dealing With Delicate Situations

If you happen to have a unique type of shower tile that is no longer manufactured, you may want to think twice before ripping out your old faucet yourself and installing a new one in its place. In such situations, the faucet removal and installation process truly needs to be handled with care so as not to break up the irreplaceable tile in question. Therefore, if you’re dealing with a delicate situation, you’re probably best off taking the margin for error out of your own hands.

When Something Going Wrong during the Installation

While faucet installation is usually a reasonably simple job, like any type of home improvement, there is always the possibility of something going wrong. If you happen to make a mistake and wind up damaging a high-end faucet – or your bathroom – during the installation process, you’ll be on the hook from a financial perspective. On the other hand, if you bring in a plumbing professional to install your faucet and something goes wrong during the job, he – not you – will be responsible for making things right.

If you’re fairly handy and not dealing with high-end materials or extraordinarily unique surfaces, there’s no reason to fork over your money to pay for something that you can easily do yourself. However, if you don’t have a lot of faith in your ability to get the job done right, and you’d rather not run the risk of damaging your bathroom in the process, it’s a good idea to hire a plumber and have him install your new faucets.

Article Source: http://www.articlesbase.com/home-improvement-articles/why-to-hire-a-professional-for-faucet-installation-2429297.html

Even though it is the beginning of October, in a few hours it will be Halloween, and in a few days it will be Thanksgiving, and in a few weeks it will be Christmas! Wow! How fast time flies! Especially when you have lots to do!

Now back before summer ended, you said you were going to remodel the kitchen after the kids went back to school! They have been back in school for over a month…so it is time to remodel that kitchen before it is too late! Because if you don’t do it now, you will have to wait until after the first of the new year! Why wait that long?

All you have to do…is go online and visit www.MasterFaucet.com and select the new kitchen sink and faucet that you want, and then have it shipped to your front door! Then decide whether you will be replacing the kitchen counter tops or not, and if so, then make the needed arrangements for that part of the new kitchen job.

Then ask yourself whether you are going to replace the flooring or not, and if you are, then make those arrangements as well! Just take it in steps, and it isn’t that difficult! But it all starts with the new kitchen sink and faucet! 

You see, if the new kitchen sink will be larger or smaller, then the kitchen counter tops will need to be changed, and the floor should always be the last step of the job. Some folks are happy to just install a new kitchen sink and faucet, and then it seems like a whole new kitchen!

Maybe you can replace the kitchen sink and faucet, and repaint the walls, and that will be all that you need! So, whatever you are going to do, NOW is the time to do it! You will thank me later, so hurry and get going!

Article Source: http://www.articlesbase.com/holidays-articles/new-kitchen-in-a-few-weeks-it-will-be-christmas-get-that-new-kitchen-installed-now-3435650.html